Tuesday, 20 June 2017

Configuring And Resetting Universal Remote [Tutorial]

Configuring And Resetting Universal Remote [Tutorial]

There are 5 basic functions which your new Airtel remote needs to learn about your TV
1. TV Power
2. TV Mute
3. AV

Methods for configuring: .

Step 1: Bring Airtel digital TV remote in learning mode. Press and hold ‘’OK + Numeric 2” key for 3 seconds. The LED blinks twice to indicate that your Airtel remote is ready to learn.

Step 2 : Hold the source remote and Airtel remote in front of each other ( 3cm-6m apart).

Step 3: Press & release the key (First on Airtel remote and then on to Source remote) which needs to be programmed in Airtel remote.

Step 4: Press “OK” on Airtel remote to store the new information about your TV. The LED will blink twice to indicate successful transfer to knowledge from your current TV remote to the new Airtel remote.

If the Airtel remote blinks four times, it means the learning failed.

Procedure to reset adtv remote to default.

Once universal remote is configured then if we need to reset it Press and hold red and ok button for 3 seconds and then press 980 and finally ok. Now adtv universal remote is reset.

Credit: Tapas Sarkar

2 on: "Configuring And Resetting Universal Remote [Tutorial]"

⚠ Do not spam here!